Self-adhesive SBS cap sheet documented in the historical Börner technical archive.
Self-adhesive SBS cap sheet
This material belongs to the bituminous roofing archive category. Its position and responsibility must remain clear when it is compared with primers, vapour-control layers, underlays, exposed membranes, drainage products or detailing components.
Essential technical data
- Product code
- TN631880
- Thickness
- 4.2 mm
- Mass
- 5.2 kg/m²
- Dimensions / packaging
- 7.5 × 1.08 m
- Reinforcement
- 280 g/m² polyester/glass composite
- TDS revision
- 2019-09
- Source table page
- 2
Thermal conductivity and R-value are not declared in the reviewed TDS.
Irish supply weight selected by Sergej on 8 September 2026, consistent with the Availability table. The performance table also prints 4.07 ±5% kg/m². User identifies separate variants; do not merge their properties or create a second complete product identity without its matching document. Other fields below remain attributed to this TDS rather than independently certified for the selected variant.
Four checks before this material enters a build-up.
- 01Confirm the exact function
Check that the product is being used for the technical role shown on this page rather than as a substitute for another layer.
- 02Assess the substrate and attachment
Confirm the support layer, surface condition, preparation and the approved method of bonding, fixing or application.
- 03Coordinate every interface
Review laps, seams, edges, outlets, penetrations, corners, terminations and compatible adjacent materials.
- 04Check current controlled information
Verify the current TDS, DoP, fire data, installation guidance, warranty route and project-specific requirements before use.
Archived technical data sheet
English · PDF · Revision 2019-09. Historical reference; check current controlled documents before specification.
PDF upload pending