TECHNICAL KNOWLEDGE HUB
Better roofs begin with better decisions.
Practical roofing and waterproofing guidance shaped by real products, real sites and the problems that appear when details are overlooked.
15+Roofing & Waterproofing Systems
Technical Training& Site Inspections
100%Technical focus
BUILT ON SITE EXPERIENCE
Inspection · Systems · Specification
THE PRINCIPLE
Verification before assumption.
Details before failure.
THE KNOWLEDGE LIBRARY
Practical answers for better roofing decisions.
This library brings together the systems I work with, the details I inspect and the lessons that repeatedly matter on site. It is written for designers, contractors and building owners who want a clearer view before work begins.
Liquid Waterproofing
Winkler, Res-Tec and Scott Bader roof, balcony and below-ground systems, reinforced GRP, repairs and specialist coatings—selected around substrate, moisture, pressure and detailing.
OPEN SECTION →02Flat Roofing
DANOSA, Ravago and MIDA working ranges, an independent EPDM systems library, and historical Börner and TECHNONICOL archives—organised by build-up, attachment and detailing.
OPEN SECTION →03Pitched Roofing
Eurovent control layers, current MIDA shingles and historical SHINGLAS experience—connecting the covering, underlay, airtightness and critical interfaces.
OPEN SECTION →04Roof Refurbishment
Survey-led strategies that address the cause of failure—not simply the visible leak.
OPEN SECTION →05Inspections & Surveys
Evidence-based condition assessment, defect diagnosis and practical reporting.
OPEN SECTION →06Specification Support
System selection, build-up review and detail coordination from design to installation.
OPEN SECTION →07Building Performance
Project-specific DANOSA acoustic systems for impact, airborne and low-frequency noise across floors, walls, ceilings and building services.
OPEN SECTION →WATERPROOFING BASICS
Ideas built for the real world.
Foundation articles connect material behaviour, preparation, detailing, application conditions and compatibility.
WATERPROOFING BASICS · PART 1
Primer is not just “extra product”
Why primer is part of the waterproofing system—and why correct preparation, compatibility and timing matter.
READ PART 1 →WATERPROOFING BASICS · PART 2
The substrate decides the performance
Why assessment, preparation and compatibility below the system determine what happens above it.
READ PART 2 →WATERPROOFING BASICS · PART 3
Trapped moisture can destroy a system from inside
Understanding substrate moisture, vapour movement and why a dry-looking surface can still carry serious risk.
READ PART 3 →WATERPROOFING BASICS · PART 4
Why upstands matter more than the flat area
Why changes in direction, terminations and vertical details often determine whether the whole roof succeeds.
READ PART 4 →WATERPROOFING BASICS · PART 5
Why details decide the life of the roof
How corners, outlets, penetrations and terminations can determine the performance of the entire system.
READ PART 5 →WATERPROOFING BASICS · PART 6
Why curing time cannot be rushed
Why surface dry is not the same as fully cured—and why the next stage must wait until the system is ready.
READ PART 6 →WATERPROOFING BASICS · PART 7
Why application conditions matter
How temperature, humidity, wind, rain and dew point can compromise even the correct waterproofing product.
READ PART 7 →REPAIR-LED STRATEGYDETAILS FIRST.
CONTINUITY SECOND.
CASE STUDY / 01CONTINUITY SECOND.
CASE STUDY / 01
Ageing asbestos-cement roof: repair before replacement.
A real refurbishment strategy combining targeted void filling, flexible joint repair, reinforced detailing, BASE I primer and a continuous liquid-applied protective finish.
- Focus
- Corrugated roof refurbishment
- Method
- Targeted repair + reinforced coating
- System
- BASE I + ONE Vertical
FALLOUTLET
2,500 m² REFURBISHMENTREPAIR THE DECK.
RESTORE THE DRAINAGE.
THEN WATERPROOF.
CASE STUDY / 02RESTORE THE DRAINAGE.
THEN WATERPROOF.
CASE STUDY / 02
Old torch-on roof: rebuild what matters beneath the membrane.
A large-scale refurbishment combining selective plywood and OSB deck replacement, corrected falls, new outlets and ventilation details with a two-layer Börner SBS system.
- Area
- Approximately 2,500 m²
- Method
- Deck repair + drainage correction
- System
- GEBÖRTOL + MONOPLEX + POLY-ELAST
ABOUT SERGEJ
Technical knowledge built between specification and site.
Building Envelope Technical Specialist
Roofing & Waterproofing
- Focused experience
- Roofing & waterproofing since 2019
- Working across
- Ireland & Northern Ireland
- Perspective
- Product · Specification · Site
I am a roofing and waterproofing technical specialist based in Ireland. My wider construction background extends back to 2007, with my work focused specifically on roofing, waterproofing and building-envelope systems since 2019.
In my current role as Technical Sales Manager — Roofing & Waterproofing, I work between manufacturers, architects, quantity surveyors, contractors, builders merchants and installation teams across Ireland and Northern Ireland.
My experience covers liquid-applied waterproofing, torch-applied and self-adhesive membranes, PVC, EPDM, GRP, insulation, airtightness, breathable pitched-roof underlays and roof ventilation systems.
HOW I APPROACH A ROOF
Knowing the product name is the easy part. The real work is understanding the substrate, moisture, compatibility, detailing, workmanship and conditions in which the system will be installed.
PRACTICAL FOCUS
TECHNICAL TRAINING & SYSTEM CERTIFICATIONS
CURRENT PROFESSIONAL DEVELOPMENT
Certificate in Engineering in Energy Renovation for Traditional Buildings
Technological University of the ShannonCommencing September 2026
I created this library to share that experience in a useful way: clear explanations, honest comparisons and practical points that can prevent expensive mistakes.
TECHNICAL CONVERSATION
Have a roof question worth looking at properly?
For specification support, system selection, inspection discussions or professional collaboration. Share the key details and I will respond using your preferred contact method.
An initial enquiry does not constitute a project specification or design instruction. Project-specific guidance requires review of the relevant information and site conditions.